|
| 
|
 |
| Goggle Lens Changing Instructions
 |
This Lens installation/removal proceedure applies to Oakley A-Frame, Oakley O-Frame, Oakley Stockholm, Oakley Crowbar and Oakley Wisdom Goggles. |
| |
 |
| To Insert a Lens: |
| Step 1 |
: |
Insert the lens into the frame groove nose area first. |
| Step 2 |
: |
Insert Left and Right sides of the lens into the frame grooves. |
| Step 3 |
: |
Pull the frame over the top of the lens and snap the notches in the lens around the frame tabs. |
| Step 4 |
: |
Make sure the notches in the lens are properly covered. |
| |
|
|
 |
| To Remove a Lens: |
| Step 1 |
: |
Pull the top of the frame away from the lens, releasing the notches from the frame tabs. |
| Step 2 |
: |
Slide the lens away from the frame at sides, left or right first it does not matter. |
| Step 3 |
: |
Pull the lens away from the bottom of the frame around the nose area. |
If you encounter any problems installing/removing your
Oakley Replacement Lens please call our customer service line on 0845 456 0435.
|
| --- OFFICIAL - Oakley Authorised Internet Dealer --- |
|
|
|
